CODE OF VIRGINIA

ELECTRIC EQUIPMENT (§ 45.1-161.193)

A. Electric equipment taken into or used inby the last open crosscut or in other
than intake air shall be permissible equipment.

B. Permissible equipment used in areas specified in subsection A shall be
maintained in permissible condition.

C. Electric equipment shall not be taken into or operated in any place where a
methane level of one percent or more is detected.

D. Voltage limitations for underground installations of electric equipment using
direct or alternating current shall conform to the voltages provided in 30
C.F.R. § 18.47.

E. Electric equipment must be permissible and maintained in a permissible
condition when such equipment is located within 150 feet of pillar workings or
longwall faces.

F. Electric conductors and cables installed in or by the last open crosscut, or
within 150 feet of pillar workings or longwall faces, shall be:

   1.  Shielded high-voltage cables supplying power to permissible longwall and
   other equipment;

   2.  Interconnecting conductors and cables of permissible longwall equipment;

   3.  Conductors and cables of intrinsically safe circuits; or

   4.  Cables and conductors supplying power to low and medium voltage
   permissible equipment.

G. Electric equipment shall be maintained in safe operating condition at all
times while it is being used, and any unsafe condition shall be corrected
promptly or the equipment shall be removed from service.

HISTORY: Code 1950, § 45-83; 1954, c. 191; 1966, c. 594, § 45.1-83; 1993, c.
442; 1994, c. 28; 1999, c. 256; 2011, cc. 826, 862; 2015, cc. 103, 397.